Parts & Accessories - ANTI-SIPHONS FTA

Measurements are from the Inside Diameter (ID) of the Fuel Tank Neck. Anti siphons are designed to fit male threaded aluminum or steel fill necks.

Always confirm you filler neck ID size and check your cap. Many Locking Diesel Fuel Caps are not compatible to use with a fuel fill neck that has an Anti-Siphon installed.

Reefer & MD Fuel Tank Anti Siphons
Part No. Description
FTA-187-75 Reefer & MD Anti siphon w/ 1.875" Filler neck, & large tab 3 3/4" from top Note - does not work with locking fuel cap
Freightliner Fuel Tank Anti Siphon
Part No. Description
FTA-225-7 Freightliner Anti siphon w/ 2.25" Filler neck, & large tabs at 3/4" & 2 3/4" from top
FTA-2-7 Freightliner Anti siphon w/ 2" Filler neck, & 8 small tabs around top large tab 3 7/8" from top Note - does not work with locking fuel cap
Volvo, Mack, International Fuel Tank Anti Siphons
Part No. Description
FTA-25-675 Volvo, Mack Anti siphon w/ 2.5" Filler neck, & large tab 3 3/4" from top
FTA-3-7 Volvo, Mack Anti siphon w/ 3" Filler neck, & large tab 3 3/4" from top
Kenworth Fuel Tank Anti Siphons
Part No. Description
FTA-25-7 Kenworth Anti siphon w/ 2.5" Filler neck, & large tabs at 1/2" & 2 3/4" from top Note - does not work with locking fuel cap
FTA-2-7K Kenworth Anti siphon w/ 2" Filler neck, & 8 small tabs around top large tab at Note - does not work with locking fuel cap
4" Filler Neck Tank Anti Siphons
Part No. Description
FTA-4-9 Anti siphon w/ 4" Filler neck, & large tab 4 1/2" from top
Peterbilt Fuel Tank Anti Siphons
Part No. Description
FTA-P-67 Peterbilt Anti siphon w/ installation kit & allen wrench 2.5" ID Fill Neck

Parts & Accessories - CAPS FTA

All Caps are Female Threaded unless otherwise noted, and are for diesel fuel tanks. Caps fit aluminum tanks (unless noted for steel).

Always verify ID filler neck size. Non Vented Caps must be used with Vented Tanks. Vented Caps may be used with Non-Vented or Vented Tanks.

Reefer trailer, Int MD Truck 2.0" ID Fuel Cap
Part No. Description
FTA-C-02 LOCKING Cap Assembly Alum 2.0”- 11.5 NPSH Threaded for 2” SCH 40/80 neck, (ID of Cap 2.25”) Features 220°F Thermal Relief, incl. 8.00” Chain & 6.50” Bail, W/ 'DIESEL FUEL ONLY'. Fuel Tank must be Vented.
FTA-C-08 NON-LOCKING  Cap Assembly Brass 2.0”- 11.5 NPSH Threaded for 2" SCH 40/80 neck (ID of Cap 2.25") Features 190°F Thermal Relief, 3 Lug, incl. 8.00” Chain & 6.50” Bail, W/ 'NON Vented & MICH FLEET'
FTA-C-91A NON-LOCKING Cap Assembly Alum 2.0-11.5 NPSH (ID of Cap 2.25") Full Function Vented,  255°F Thermal W/ Pressure Relief, incl. 6.0” Ball Chain & 4.5” Bail, W/ 'DIESEL FUEL ONLY'
FTA-C-98 NON-LOCKING Cap Assembly Alum 2.0”- 11.5 NPSH Threaded for 2" SCH 40/80 neck (ID of Cap 2.25") 190°F Thermal Relief, incl. 3 Lug, 8.00” Chain & 6.50” Bail, W/ 'DIESEL FUEL ONLY'
Freightliner M2 Fuel Caps 2.5 ID
Part No. Description
FTA-C-13 LOCKING Cap Assembly Alum M-2 2.5”- 8 UN Triple Lead, (ID of Cap 2.38”) 220°F Thermal Relief, incl, 8.00” Chain & 6.50” Bail, W/ 'DIESEL FUEL ONLY'
FTA-C-12 NON-LOCKING Cap Assembly Alum M-2 2.5”- 8 UN Triple Lead, (ID of Cap 2.38”) 220°F Thermal Relief, incl, 8.00” Chain & 6.50” Bail, W/ 'DIESEL FUEL ONLY'
Kenworth 3.5-5.5 NS Caps
Part No. Description
FTA-C-442L Kenworth LOCKING, Non-vented, Cap Assembly Alum 3.5”- 5.5 NS, (ID of Cap 3.375"), Solid, 8.0” Chain & 6.50” Bail W/ 'ULTRA LOW SULFUR DIESEL FUEL'
FTA-C-314 Kenworth NON-LOCKING, Non-vented Cap Assembly Alum 3.5”- 5.5 NS, (ID of Cap 3.375"), Pressure Relief 8.0” Chain & 6.50” Bail W/ 'DIESEL ONLY KEEP CLEAN'
FTA-C-442 Kenworth NON-LOCKING, Non-vented, Cap Assembly Alum 3.5”- 5.5 NS, (ID of Cap 3.375"), Solid, 8.0” Chain & 6.50” Bail W/ 'ULTRA LOW SULFUR DIESEL FUEL'
FTA-C-50 KENWORTH LOCKING, Full Function Vented Cap Assembly Alum 3.5”- 5.5 NS, (ID of Cap 2.38”) Features 190°F Thermal Relief, 8.00” Chain & 6.50” Bail, W/ 'DIESEL ONLY KEEP CLEAN & Vented CAP'
FTA-C-81 KENWORTH NON-LOCKING, Full Function Vented Cap Assembly Alum 3.5”- 5.5 NS, (ID of Cap 3.375”) Features 190°F Thermal Relief, 8.00” Chain & 6.50” Bail, W/ 'DIESEL ONLY KEEP CLEAN & Vented CAP'
FTA-C-97 Kenworth LOCKING Non-vented Cap Assembly Alum 3.5”- 5.5 NS Features 255°F Thermal Relief, 12.00” Chain & 6.50” Bail, W/ 'DIESEL ONLY KEEP CLEAN'
4"Fuel Caps - Logging/Dump Trucks
Part No. Description
FTA-C-64 LOCKING, Full Function Vented Cap Assembly Alum 4.0-8 NPSM thread, (ID of Cap 4.35”) Features 255°F Thermal W/ Pressure Relief, 12.00” Chain & 8.35” Bail, W/ 'DIESEL ONLY KEEP CLEAN'
FTA-C-01 NON-LOCKING, Full Function Vented Cap Assembly Alum 4.0-8 NPSM thread, (ID of Cap 4.35”) Features 255°F Thermal W/ Pressure Relief, 12.00” Chain & 8.35” Bail, W/ 'DIESEL ONLY KEEP CLEAN'
FTA-C-04 LOCKING Non-vented Cap Assembly Alum 4.0-8 NPSL thread, (ID of Cap 4.35”) Features 190°F Thermal Relief, 12.00” Chain & 8.35” Bail W/ 'DIESEL ONLY KEEP CLEAN'
FTA-C-15 LOCKING Non-vented Cap Assembly Alum 4.0-8 NPSL thread, (ID of Cap 4.35”),Pressure Relief with 12.00” Chain & 8.35” / 'DIESEL ONLY KEEP CLEAN'
FTA-C-22 NON-LOCKING, Full Function Vented Cap Assembly Alum 4.0-8 NPSL thread, (ID of Cap 4.35”) Features 255°F Thermal W/ Pressure Relief, incl. 12.00” Chain & 8.35” Bail, W/ 'DIESEL ONLY KEEP CLEAN'
FTA-C-23 LOCKING, Full Function Vented Cap Assembly Alum 4.0-8 NPSL thread, (ID of Cap 4.35”) Features 255°F Thermal W/ Pressure Relief, 12.00” Chain & 8.35” Bail, W/ 'DIESEL ONLY KEEP CLEAN'
FTA-C-90 NON-LOCKING, Non-vented Cap Assembly Alum 4.0-8 NPSL thread, (ID of Cap 4.35") Features 190°F Thermal Relief, 12.00” Chain & 8.35” / 'DIESEL ONLY KEEP CLEAN'
Peterbilt Lever Style Locking Fuel Cap
Part No. Description
FTA-C-67-P Peterbilt LOCKING lever style, Non-vented Cap Assembly Alum 4.0” for 4” SCH 40/80 neck, & Pressure Relief, 8.00” Chain & 6.50” Bail
FTA-C-68-P Peterbilt NON-LOCKING lever style, Non-vented Cap Assembly Alum 4.0” for 4” SCH 40/80 neck, & Pressure Relief, 8.00” Chain & 6.50” Bail
Volvo, Mack, Int Caps - Diesel Tanks Not Labelled Low Sulfur
Part No. Description
FTA-C-69 LOCKING  Non-vented Cap Assembly Alum 3.0”- 8 NPSL, (ID of Cap 3.375”), Pressure Relief 8.00” Chain & 6.50” Bail,  W/ 'DIESEL ONLY KEEP CLEAN'  
FTA-C-19 NON-LOCKING Full Function Vented Cap Assembly Alum 3.0”- 8 NPSL, (ID of Cap 3.375”) Features 255°F Thermal W/ Pressure Relief, 8.0” Chain & 8.35” Bail,  W/ 'DIESEL ONLY KEEP CLEAN'
FTA-C-28 NON-LOCKING, Non-vented Cap Assembly Alum 3.0”- 8 NPSL, (ID of Cap 3.375”) 8.0” Chain & 8.00” Bail, W/ 'DIESEL ONLY KEEP CLEAN'
FTA-C-80 LOCKING Full Function Vented Cap Assembly Alum 3.0”- 8 NPSL, (ID of Cap 3.375”) Features 190°F Thermal W/ Pressure Relief, 8.0” Chain & 6.50” Bail,  W/ 'DIESEL ONLY KEEP CLEAN'
FTA-C-87 NON-LOCKING Non-vented Cap Assembly Alum 3.0”- 8 NPSL, (ID of Cap 3.375”) Features 190°F Thermal W/ Pressure Relief, 8.0” Chain & 6.50” Bail,  W/ 'DIESEL ONLY KEEP CLEAN'
Volvo Low Sulfur Labelled Tank Cap
Part No. Description
FTA-C-722 NON-LOCKING Non Vented Cap Assembly Alum 3”- 8 UN Triple Lead, (ID of Cap 2.88”) Solid,  6.50” Chain & 6.50” Bail, No Logo,  W/ 'ULTRA LOW SULFUR DIESEL FUEL ONLY' ID under cap  FTA-C-722
FTA-C-722L LOCKING Non Vented Cap Assembly Alum 3"- 8 UN Triple Lead, (ID of Cap 2.88") Solid,  6.50" Chain & 6.50" Bail, No Logo,  W/ 'ULTRA LOW SULFUR DIESEL FUEL ONLY' ID under cap  FTA-C-722
FTA-C-76 Low Sulfur, LOCKING, Non-vented Cap assembly 3"- 8 UNNS 8.00” Chain & 6.50” Bail,  W/ 'ULTRA LOW SULFER DIESEL FUEL ONLY'  
Borg Warner Steel Tank Fuel Caps
Part No. Description
FTA-C-74 Borg Warner LOCKING, Non-vented, Steel Tank Fuel Cap Assembly Alum 2.5-8 UN (ID of Cap 4.35”) Features  220°F Thermal Relief, incl. 8.00” Chain & 6.50” Bail,  W/ 'DIESEL FUEL ONLY'  
FTA-C-14-03 Borg Warner LOCKING, Vented, Steel Tank Fuel Cap Assembly Alum 2.5-8 UN (ID of Cap 4.35”) Features  255°F Thermal Relief, incl. 12.00” Chain & 4.50” Bail,  W/ 'DIESEL FUEL ONLY'  
Freightliner 1/4-Turn Fuel Caps
Part No. Description
FTA-C-92 Freightliners 1/4 Turn NON-LOCKING Non-vented Cap Assembly Features  220°F Thermal Relief, incl. 8.00” Chain & 6.50” Bail,  W/ 'DIESEL FUEL ONLY' & No Logo
FTA-C-93 Freightliners 1/4 Turn LOCKING Non-vented Cap Assembly Features  220°F Thermal Relief, incl. 8.00” Chain & 6.50” Bail,  W/ 'DIESEL FUEL ONLY'  & No Logo

Parts & Accessories - HYDRAULIC TANKS FTA

Premium Lightweight Aluminum tanks in round, saddle mount and upright, rectangular orientations to fit a variety of applications and layouts.

Ships with required hardware for frame mounting and includes Filler Breather Cap with Strainer, Sight Level Gauge w/Temperature indicator, and multiple ports with sizing options.

Hydraulic Tank Components
Part No. Description
FTA-BCA-32 LENZ Filler Breather Cap with Nylon Strainer 57XL-40N for Saddle-Mount & Upright Hyd Tanks Keeps Fluids Clean and Prolongs System Life with 40 Micron, 4" Nylon Strainer
FTA-SG-46 LENZ Sight Level Gauge with Temp Indicator for Saddle-Mount & Upright Hyd Tanks 5" Transparent Sight Glass with Guard and Nitrile Seal. Max Pressure is 44 PSI
Saddle Mount Hydraulic Tanks
Part No. Description
FTA-HT-025R 25 Gallon Alum Saddle Mnt Hydraulic Tank, w/ Filler Breather Cap, Level/Temp Gauge, 2-Ports Includes FTA-BCA-32 LENZ Filler Breather Cap / 40 Micron Nylon Strainer and FTA-SG-46 LENZ Sight Level Gauge w Temp Control.
FTA-HT-035R 35 Gallon Alum Saddle Mnt Hydraulic Tank, w/ Filler Breather Cap, Level/Temp Gauge, 2-Ports Includes FTA-BCA-32 LENZ Filler Breather Cap / 40 Micron Nylon Strainer and FTA-SG-46 LENZ Sight Level Gauge w Temp Control.
FTA-HT-050R 50 Gallon Alum Saddle Mnt Hydraulic Tank w/ Filler Breather Cap, Level/Temp Gauge, 2-Ports Includes FTA-BCA-32 LENZ Filler Breather Cap / 40 Micron Nylon Strainer and FTA-SG-46 LENZ Sight Level Gauge w Temp Control.
Up-Right Hydraulic Tanks
Part No. Description
FTA-HT-633 35 Gallon Alum Up-right Hydraulic Tank w/ Hardware, Breather Cap, Level/Temp Gauge, 2-Ports Includes FTA-BCA-32 LENZ Filler Breather Cap / 40 Micron Nylon Strainer and FTA-SG-46 LENZ Sight Level Gauge w Temp Control.
FTA-HT-632 50 Gallon Alum Up-rightHydraulic Tank w/ Hardware, Breather Cap, Level/Temp Gauge, 2-Ports Includes FTA-BCA-32 LENZ Filler Breather Cap / 40 Micron Nylon Strainer and FTA-SG-46 LENZ Sight Level Gauge w Temp Control.

Parts & Accessories - Parts & Accessories

T-Handle Kit
Part No. Description WxDxH (in) Wt. (lbs)
FTSS001 Replacement T-Handle, stainless steel w/ foam gasket & rivets - randomly keyed 4.75 x 2.6875 x 4.9375 1.5
PTO Control Bracket, SS
Part No. Description WxDxH (in) Wt. (lbs)
G408 PTO Control Bracket for Chelsea, floor mount, stainless steel 6 x 7.5 x 5.25 1.1
KW Air Spring Bracket
Part No. Description WxDxH (in) Wt. (lbs)
K048-449S Kenworth Air Spring Bracket, steel, powder coated, heavy duty 8 x 8 x 3 6
Slide Bar Latch Kit
Part No. Description WxDxH (in) Wt. (lbs)
PD015 Slide bar Latch, stainless steel slide bar w/ aluminum tab & mounting hardware 6.75 x 1.281 x 3.275 1.2

Parts & Accessories - TANK COMPONENTS FTA

Premium Fuel Tank components with un-matched reliability and performance.

Contact factory for custom options or bulk pricing for manufacturing.

Fuel Tank Repair Bands
Part No. Description
FTA-30TRB-4 Alum Tank Skin repair band 4" wide, up to 30" Tank Diameter
FTA-30TRB-6 Alum Tank Skin repair band 6" wide, up to 30" Tank Diameter
FTA-30TRB-8 Alum Tank Skin repair band 6" wide, up to 30" Tank Diameter
Diesel Fuel Tank Adapters/Flanges
Part No. Description
FTA-A-29-03 Adapter Alum Bottom Drain
FTA-A-10 Adapter Alum for Ø24.0 Tank W/ Ø4.66 Flat & no Holes
FTA-A-31 Adapter Alum Radiused 12.31 W/ Sender Mount & 2 EA 1/2 NPSF & 1 EA 1/4 NPSF
FTA-A-33 Adapter Alum Radius 12.31 W/ Sender Mount & 2 Ea.1/2" NPSF Thread & 1 Ea. 1/4" NPSF Thread
FTA-A-34 Adapter Steel Radius 12.31 W/ Sender Mount & 2 Ea. 1/2" NPSF Thread & 1 Ea. 1/4" NPSF Thread
FTA-A-53R Cluster Plate Assy. W/Tube Steel R.H. 2 Ea. 1/2" NPT Thread Ports Also includes 3/8" NPT Thread, Tube Port Immerse in Rust Inhibitor
Aluminum Weld Flanges
Part No. Description
FTA-ALB-125R 1/8"- Full Round OD 0.160 Alum Weld Flange - 0.160 Thickness
FTA-ALB-1000R 1"- Full Round OD 0.160 Alum Weld Flange - 0.160 Thickness Bulk pricing available on orders of 100 plus.
FTA-ALB-1250C 1.25"- Flats on OD-Curved 0.160 Alum Weld Flange - 0.160 Thickness Also available on Flat Weld Flange (use part # FTA-C-1250F)
FTA-ALB-1500C 1.5"- Flats on OD-Curved 0.160 Alum Weld Flange - 0.160 Thickness Also available on Flat Weld Flange (use part # FTA-C-1500F)
FTA-ALB-2000F 2"- Flats on OD-Flat 0.190 Alum Weld Flange - 0.190 Thickness
FTA-ALB-250R 1/4"- Full Round OD 0.160 Alum Weld Flange - 0.160 Thickness
FTA-ALB-375R 3/8"- Full Round OD 0.160 Alum Weld Flange - 0.160 Thickness Flats also available (use part # FTA-ALB-375F)
FTA-ALB-500R 1/2"- Full Round OD 0.160 Alum Weld Flange - 0.160 Thickness Flats also available (use part # FTA-ALB-500F)
FTA-ALB-750R 3/4"- Full Round OD 0.160 Alum Weld Flange - 0.160 Thickness
FTA-ALB-RING-C C Sending Unit Gage Ring Curved Flat option aslo available (use part # FTA-ALB-RING-F)
Drain Check Valves
Part No. Description
FTA-DP-55 1/2" Brass Drain Check Valve W/Brass Plug
FTA-DP-78 3/8" Brass Drain Check Valve W/Brass Plug
Stand Pipes / Draw Tubes
Part No. Description
FTA-DT-11.89 Stand Pipe Brass 11.89 Long W/ Fitting .500-14 NPTF Ext W/ Vibra-seal & .375-18 NPTF Int
FTA-DT-14.49 Stand Pipe Brass 14.49 Long W/ Fitting .500-14 NPTF Ext W/ Vibra-seal & .375-18 NPTF Int
FTA-DT-17.80 Stand Pipe Brass 17.80 Long W/ Fitting .500-14 NPTF Ext W/ Vibraseal & .375-18 NPTF Int : NOTE:
FTA-DT-20.95 Stand Pipe Brass 20.95 Long W/ Fitting .500-14 NPTF Ext W/ Vibra-seal & .375-18 NPTF Int
FTA-DT-28.03 Stand Pipe Brass 28.03 Long W/ Fitting .500-14 NPTF Ext W/ Vibra-seal & .375-18 NPTF Int
FTA-DT-38.50 Stand Pipe Brass 38.50 Long W/ Fitting .500-14 NPTF Ext W/ Vibra-seal & .375-18 NPTF Int
Stand Pipes / Draw Tubes
Part No. Description
FTA-DT-22.92 Stand Pipe Brass 22.92 Long W/ Fitting .500-14 NPTF Ext W/ Vibra-seal & .375-18 NPTF Int
Fuel Tank Fill Necks w/ Flanges
Part No. Description
FTA-FN-94 Neck & Pocket Alum 3.0"- 8 NPSL Thread, W/13.69 R, No Lettering. International, Volvo, Mack Fuel Tank
FTA-NF-10 Cam Neck & Pocket Assy Alum No Lettering. Freightliner Fuel Tank
FTA-NF-16 Tear Drop Assy Alum Ø 26 Dia W/ 2.88" - 8 UNNS Fill Neck Sender mount Vent port & Heater Port No Lettering. Volvo Low Sulfur Fuel Tank
FTA-NF-19 Neck & Pocket Alum 3.0"- 8 NPSL Thread, with Flange. International, Volvo, Mack Fuel Tank
FTA-NF-52 Tear Drop Assy Alum Ø 26 Dia W/ 3" - 8 NPSL Fill Neck Sender Mount 1/4 NPTF Heater & 1/2 NPTF Vent Ports No Lettering. Volvo non-Low Sulfur Fuel Tank
FTA-NF-55 Tear Drop Assy Alum Ø 22 Dia W/ 2.88" - 8 UNNS Fill Neck, Sender Mount & Vent Port & Heater Port No Lettering. Volvo Low Sulfur Fuel Tank
FTA-NF-857 Neck & Pocket Alum Ø26.0 Tank Radius, No Lettering. Peterbilt Fuel Tank
FTA-NP-28-24.5 Neck & Pocket Alum 3.5"- 5.5 NS Thread, Ø24.5 Tank Radius, No Lettering. Kenworth Fuel Tank
Fuel Tank Necks
Part No. Description
FTA-N-04 Neck Steel 2.0"-11.5 NPSH x 2.74" Length
FTA-N-20 Neck Alum 3.00"-8 NPSL x 3.575" Length for Volvo, Mack, International
FTA-N-49 Cam Neck Cast Alum 1/4 Turn 2.97±.01 Long for Freightliner
FTA-N-72 Neck Alum 2.5"-8 UN 2A x 3.00" Length
FTA-N-914 Neck Alum 4.00"-8 NPSL x 4.00" Length
FTA-N-92 Neck Alum 2.5"-8 UN Triple lead x 2.30" Length for Freightliner M2
FTA-N-988 Neck Steel 4.00"-8 NPT x 4.00" Length
FTA-N4-73 Neck Alum 2.0"-11.5 NPSH x 4.00"Length
FTA-N6-73 Neck Alum 2.0"-11.5 NPSH x 6.00" Length
J1114 Style Fuel Fill Necks
Part No. Description
FTA-N-TWI2 Fill Neck Steel, J1114 thin wall 2.69" length
FTA-C-L Steel Fill Neck Cap for 2.593" OD, Vented, W/ Lug,
FTA-INS Steel Fuel Fill Neck Cap Insert J1114 Diesel Engine Open Bottom/No Flapper
FTA-N-B1 Fill Neck Steel 2.281" OD x 1.219" Long
FTA-N-B2 Fill Neck Steel 2.281" OD x 2.688" Long
FTA-N-L Fill Neck Steel 2.593" OD x 1.188" Long W/ Lug,
FTA-N-TI2 Fill Neck Steel, J1114 thick wall 2.69" length
FTA-N-TI4 Fill Neck Steel, J1114 thick wall 4.50" length
FTA-N-TI6 Fill Neck Steel, J1114 thick wall 6.50" length
FTA-N-TWI4 Fill Neck Steel, J1114 thin wall 4.50" length
FTA-N-TWI6 Fill Neck Steel, J1114 thin wall 6.50" length
HD Radiator Neck
Part No. Description
FTA-RN-2 Alum 2"NPT Radiator Fill Neck (machined)
Steel Weld Flanges
Part No. Description
FTA-STB-125S 1/8"- 1.125 OD 0.134 Steel Weld Flange - 0.134 Thickness
FTA-STB-1000C T 1"- Container 0.134 Steel Weld Flange - 0.134 Thickness Bulk pricing available on orders of 100 plus.
FTA-STB-1250C 1.25"- Curved 0.118 Steel Weld Flange - 0.118 Thickness Also available on Flat Weld Flange (use part # FTA-STB-1250F)
FTA-STB-1250H DF 1.25"- HD-Flat 0.134 Steel Weld Flange - 0.134 Thickness
FTA-STB-125F 1/8"- 1.750 OD 0.134 Steel Weld Flange - 0.134 Thickness
FTA-STB-1500C 1.5"- Curved 0.118 Steel Weld Flange - 0.118 Thickness Flat option aslo available (use part # FTA-STB-1500F)
FTA-STB-2000C 2"- Curved 0.130 Steel Weld Flange - 0.130 Thickness Flat option aslo available (use part # FTA-STB-2000F)
FTA-STB-2000HDC DC 2"- HD-Curved 0.156 Steel Weld Flange - 0.156 Thickness Flat option aslo available (use part # FTA-STB-2000HDF)
FTA-STB-250F 1/4"- 1.750 OD 0.134 Steel Weld Flange - 0.134 Thickness
FTA-STB-250S 1/4"- 1.125 OD 0.134 Steel Weld Flange - 0.134 Thickness
FTA-STB-375F 3/8"- 1.750 OD 0.134 Steel Weld Flange - 0.134 Thickness
FTA-STB-375S 3/8"- 1.125 OD 0.134 Steel Weld Flange - 0.134 Thickness
FTA-STB-500F 1/2"- 1.750 OD 0.134 Steel Weld Flange - 0.134 Thickness
FTA-STB-750C 3/4"- Curved 0.134 Steel Weld Flange - 0.134 Thickness Flat option aslo available (use part # FTA-STB-750F)
FTA-STB-RING-C C Steel Gauge Rings Curved Flat option aslo available (use part # FTA-STB-RING-F)
Fuel Tank End Caps
Part No. Description
FTA-TE-26PB Tank End Alum .125 x 26.00 Ø 5052-H32 Including Peterbilt tanks.
FTA-TB-26N Tank Baffle Alum w/o Holes .125 x 26.00 Ø 5052-H32 Western Star split tank application.
FTA-TE-24.5KW Tank End Alum .125 x 24.5 Ø 5052-H32 Including Kenworth tanks.
FTA-TE-24H Tank End Alum w/ Holes .125 x 24 Ø 5052-H32 Flat Profile Hydraulic tanks.
FTA-TE-24HN Tank End Alum w/o Holes .125 x 24 Ø 5052-H32 Flat Profile Hydraulic tanks.
FTA-TE-WS868-01 Tank End Alum w/ Holes .125 x 26.00 Ø 5052-H32 Including Western Star tanks.
FTA-TE-WS868-02 Tank End Alum w/o Holes .125 x 26.00 Ø 5052-H32 Including Western Star tanks.
3/4" Vent Assemblies
Part No. Description
FTA-V-19 Vent Assembly Brass 0.75-14 NPTF short w/ Single Barb for 0.50 ID Hose 4.5" Length, 4-hole
FTA-V-05 Vent assy Brass 0.75-14 NPTF short w/ single barb for 0.50 ID hose 4.5" Length, 2-hole
3/8" Vent Assemblies
Part No. Description
FTA-V-22 Vent Assembly Brass 0.375-18 NPTF Single Barb for 0.312" ID Hose 2 -Hole Cage
1/2" Vent Assemblies
Part No. Description
FTA-V-37 Vent Assembly Brass 0.50-14 NPTF w/ sealant & Single Barb for 0.312" ID Hose 2 -Hole Cage
FTA-V-45 Freightliner vent Assembly Brass 1/2" threads 0.50-14 NPTF Single Barb for 0.312" ID Hose 2 -Hole Cage Freightliner Application TM-90-04926
FTA-V-50-01 Peterbilt vent Assembly Full-function 1/2" threads Double Barb for 0.25" ID Hose 230F thermal relief
FTA-V-50-02 Peterbilt vent assy full-function double barb for 0.25" ID hose 230F thermal relief w/ Vibra Seal on Threads
FTA-V-50-03 Volvo, Kenworth vent Assembly Full-function 1/2 threads Single Barb for 5/16" ID Hose 230F thermal relief
FTA-V-50-04 Volvo, Kenworth vent Assembly Full-function 1/2 threads Single Barb for 5/16" ID hose 230F thermal relief w/ Vibra Seal on Threads
FTA-V-956 Vent Assembly Brass 0.50-14 NPTF Double Barb for 0.25" ID Hose 2 -Hole Cage
1/4" Vent Assemblies
Part No. Description
FTA-V-40 Vent Assembly Brass 1/2" threads 0.25-18 NPTF Double Barb for 0.25" ID Hose
FTA-V-48 Vent Assembly Brass 1/4" Threads 0.25-18 NPTF w/o Barb
FTA-V-56 Vent Assembly Brass 0.25-18 NPTF Single Barb for 0.312" ID Hose
FTA-V-99 Vent Assembly Brass 0.25-18 NPTF Double Barb for 0.25" ID Hose 4 -Hole Cage
FTA-V-99-01 Vent Assembly Brass 0.25-18 NPTF w/ Sealant Double Barb for 0.25" ID Hose 4 -Hole Cage
Thermal Relief Plug Assembly
Part No. Description
FTA-V-59 Thermal relief plug Assembly 1.25-11.5 NPTF @ 190F

Parts & Accessories - TANK MOUNTING FTA

Tank Mounting Options to fit most makes and models of trucks and tank sizes.

Steel and Aluminum Strap Options with Premium Rubber Backing in multiple widths.

Kenworth Tank Bracket
Part No. Description
FTA-TB-KW-24.5 Kenworth Fuel Tank Bracket, 8 Guage Painted Steel, Fitst 24.5" Tanks Straps Sold Seperately
Hydraulic Tank Strap & Bracket
Part No. Description
FTA-TS-24H 2" Stainless Steel Hydraulic Tank Strap for 24" Cylindrical Tanks (T-Bolts both ends) T-Bolt to T-Bolt Ends: 64.25", Strap to Strap Ends: 57.75"
FTA-TB24 Frame Mounted Hydraulic Tank J-Bracket, Powder Coated Straps Sold Seperately
Freightliner Tank Straps
Part No. Description
FTA-TS-FM2S 2" Fuel Tank Strap WITH STEP for Freigtliner M2, FL70/80, Painted Steel T-Bolt to Strap End: 39", Strap to Strap Ends: 37"
FTA-TS-FM2P 2" Fuel Tank Strap WITHOUT STEP for Freigtliner M2, FL70/80, Painted Steel T-Bolt to Strap End: 39", Strap to Strap Ends: 37"
FTA-TS-FM2SS 2" Fuel Tank Strap WITHOUT STEP for Freigtliner M2, FL70/80, Stainless Steel T-Bolt to Strap End: 39", Strap to Strap Ends: 37"
FTA-TS-FM2SSS 2" Fuel Tank Strap WITH STEP for Freigtliner M2, FL70/80, Stainless Steel T-Bolt to Strap End: 39", Strap to Strap Ends: 37"
International Tank Straps
Part No. Description
FTA-TS-IN16D 2" Stainless Fuel Tank Strap WITHOUT STEP for International 4000 Series 16"D-Round Tanks T-Bolt to Strap End: 42.5", Strap to Strap Ends: 38.5"
FTA-TS-IN19D 2" Stainless Fuel Tank Strap WITHOUT STEP for International 4000 Series 19"D-Round Tanks T-Bolt to Strap End: 44.5", Strap to Strap Ends: 40.5"
FTA-TS-IN26 2" Stainless Steel Fuel Tank Strap WITHOUT STEP for International 26" Tanks T-Bolt to Strap End: 69", Strap to Strap Ends: 65"
FTA-TS-INP16D 2" Painted Steel Fuel Tank Strap WITH STEP for International 4000 Series 16"D-Round Tanks T-Bolt to Strap End: 42.5", Strap to Strap Ends: 38.5"
FTA-TS-INP26 2" Painted Steel Fuel Tank Strap WITHOUT STEP for International 26" Tanks T-Bolt to Strap End: 68", Strap to Strap Ends: 64.25"
FTA-TS-INPR 2" Painted Steel Fuel Tank Strap WITHOUT STEP for International 4700/4900 Rectangular Tanks T-Bolt to Strap End: 44", Strap to Strap Ends: 41"
FTA-TS-INPS26 2" Painted Steel Fuel Tank Strap WITH STEP for International 26" Tanks T-Bolt to Strap End: 68", Strap to Strap Ends: 64.25"
FTA-TS-INS16D 2" Stainless Fuel Tank Strap WITH STEP for International 4000 Series 16"D-Round Tanks T-Bolt to Strap End: 42.5", Strap to Strap Ends: 38.5"
FTA-TS-INS19D 2" Stainless Fuel Tank Strap WITH STEP for International 4000 Series 19"D-Round Tanks T-Bolt to Strap End: 44.5", Strap to Strap Ends: 40.5"
FTA-TS-INS26 2" Stainless Steel Fuel Tank Strap WITH STEP for International 26" Tanks T-Bolt to Strap End: 69", Strap to Strap Ends: 65"
Kenworth Tank Straps
Part No. Description
FTA-TS-KS 2" Fuel Tank Strap, Stainless Steel WITH STEP, Fits Kenworths 24.5" Tanks T-Bolt to Strap End: 45", Strap to Strap Ends: 40.5"
FTA-TS-K 2" Fuel Tank Strap, Stainless Steel WITHOUT STEP, Fits Kenworths 24.5" Tanks T-Bolt to Strap End: 45", Strap to Strap Ends: 40.5"
FTA-TS-K19 2" Fuel Tank Strap, Stainless Steel WITHOUT STEP, Fits Kenworths 19" Tanks T-Bolt to Strap End: 34", Strap to Strap Ends: 30"
FTA-TS-KFD 2" Fuel Tank Strap, Painted Steel for Driver's Side Fairing Application, Fits Kenworths 24.5" Tanks T-Bolt to Strap End: 46", Strap to Strap Ends: 41.5"
FTA-TS-KFP 2" Fuel Tank Strap, Painted Steel for Passenger Side Fairing Application, Fits Kenworths 24.5" Tanks T-Bolt to Strap End: 46", Strap to Strap Ends: 41.5"
Peterbilt Tank Straps
Part No. Description
FTA-TS-P26S 2" Fuel Tank Strap, Stainless Steel, Fits Peterbilt 26" Tanks T-Bolt to Strap End: 69", Strap to Strap Ends: 63"
FTA-TS-P23AP 2" Fuel Tank Strap, Polished Aluminum, Fits Peterbilt 23" Tanks T-Bolt to Strap End: 60", Strap to Strap Ends: 54.5"
FTA-TS-P26AP 2" Fuel Tank Strap, Polished Aluminum, Fits Peterbilt 26" Tanks T-Bolt to Strap End: 69", Strap to Strap Ends: 63"
Reefer Tank Straps
Part No. Description
FTA-TS-R19 2" Fuel Tank Strap, Stainless Steel, Fits Reefer Trailer 19" Tanks (T Bolts on both ends) T-Bolt to T-Bolt Ends: 59.5", Strap to Strap Ends: 50.5"
FTA-TS-R22 2" Fuel Tank Strap, Stainless Steel, Fits Reefer Trailer 22" Tanks (T Bolts on both ends) T-Bolt to T-Bolt Ends: 62.5" , Strap to Strap Ends: 53.5"
2" Tank Strap Backing
Part No. Description
FTA-TSB-2 2" Tank Strap Backing (Standard) Available in 4', 5', 10', 20' and 50' Lengths
FTA-TSB-2HD 2" Tank Strap Backing (Heavy Duty, Non-Slip, Ribbed) Available in 4', 5', 10', 20' and 50' Lengths
FTA-TSB-2HD-33 2" Rubber Tank Strap Backing for Kenworth 24.5" Tanks., 33" Long
Part No. Description
FTA-TSB-3HD-37 3" Rubber Tank Strap Backing for Kenworth, 37" Long
3" Tank Strap Backing
Part No. Description
FTA-TSB-3 3" Tank Strap Backing (Standard) Available in 4', 5', 10', 20' and 50' Lengths
FTA-TSB-3HD 3" Tank Strap Backing (Heavy Duty, Non-Slip, Ribbed) Available in 4', 5', 10', 20' and 50' Lengths
3.5" Tank Strap Backing
Part No. Description
FTA-TSB-3.5 3.5" Tank Strap Backing (Standard) Available in 4', 5', 10', 20' and 50' Lengths
FTA-TSB-3.5HD 3.5" Tank Strap Backing (Heavy Duty, Non-Slip, Ribbed) Available in 4', 5', 10', 20' and 50' Lengths
4" Tank Strap Backing
Part No. Description
FTA-TSB-4 4" Tank Strap Backing (Standard) Available in 4', 5', 10', 20' and 50' Lengths
FTA-TSB-4HD 4" Tank Strap Backing (Heavy Duty, Non-Slip, Ribbed) Available in 4', 5', 10', 20' and 50' Lengths